Modwright

Visit Site LS36.5 LS36.5 Linestage The LS 36.5 represents ModWright’s finest tube linestage performance, offering true balanced outputs and XLR inputs. It follows our SE tube linestage, the SWL 9.0SE, offering a higher level of performance, aesthetics and options. Remote volume control are standard, as is phase switching, also via remote! The LS 36.5 takes sonic performance to the next level, offering a broader and deeper soundstage and a weightier presentation, compared to the 9.0SE. Refinements in power supply design, voltage regulation, and driver circuit design all serve to raise the bar. Refinements in grounding, transformer coupling and shielding also yield a 2 x lower noise floor than its SE predecessor! Those wishing to take the performance of the LS 36.5 to the next level again, have the option of adding the PS 36.5 dual-mono, all-tube external power supply. This PS 36.5 features a complete dual-mono topology, including dual tube rectifiers and tube voltage regulation circuitry. Features: One set of XLR inputs Four sets of RCA inputs Two sets of RCA Main Outputs One set of RCA Tape Outputs One set of XLR balanced outputs Front Panel controls include: Power, Input Select and Mute, Phase (also on remote), HT/BP (Home Theater Bypass) and volume control (also on remote) Custom MWI remote control for volume, phase and mute Recommended Tube Upgrades for the LS 36.5: LS36.5 Rectifier Tube: Mullard, Amperex or Phillips ‘GZ34’ Black option also available. KWA150se KWA150 Signature Edition Power Amplifier The KWA 150 provides the strengths of both tube and solid state products: 3-D sound-staging, holographic imaging, and a beautiful midrange of tubes, combined with sparkling highs, low distortion, bass resolution, and control of solid state. The heart of the KWA 150 Amplifier is a single voltage gain stage called the Solid State Music Stage. The circuit was developed by Alan Kimmel, creator of the exceptional vacuum tube Mu stage. Features include: high-low bias switch, stereo/bridge-mono switch and true balanced floating inputs, accepting balanced and unbalanced inputs. The design incorporates a regulated power supply for the input stage, Cardas best connectors and oversized heat sinks. The first watts operate in pure Class A. The KWA 150 uses no global feedback, is direct-coupled, fully differential, dual-mono, bridgeable, and designed and built in the USA. Summary of key elements of upgrade from standard KWA150: Upgraded model of Lundahl input transformer for improved speed and dynamics. Circuit design revisions to input circuits that lower distortion and improve dyanmics and resolution. Cryo-treated, solid core ultra-pure input wiring and 12GA stranded audio-grade output signal wire to binding posts. Revised capacitor bank (current storage design) that increases total storage (capacitance) and also lowers power supply impedance, which translates to faster current delivery to the output stage. This all translates to the following in terms of sonics: A more open and resolving overall presentation. Tighter and faster bass and transients. Improved speed and dynamics, whilst still retaining tube-like midrange qualities. Improved soundstage and low-level cues due to an even LOWER noise floor. KWI200 KWI200 Integrated amplifier The KWI 200 represents the integration of Simplicity, Purity, Elegance and Power. Available with optional Phono and DAC (24/192 Asynchronous USB and RCA), offers freedom from the physical space requirements of complex audio separates. Full function remote, controls volume, mute, power, input select, remote triggers, DAC input select as well as MM or MC phono inputs (both optional). Dual digital displays, clearly visible from across the room, indicate source input and volume level. Displays may also be remotely dimmed or turned off. Manual controls are simple: Two knobs and two buttons. Power, Home Theater Bypass (or preamp-input) button, source select, and volume control knobs complete the interface. The KWI 200 uses a digitally controlled analog volume control with buffered input to the Solid State Music Stage, found in all of ModWright’s amplifiers. This allows for a volume control superior to standard potentiometers and a single gain stage, direct-coupled to the current amplified output stage for ultimate sonic purity. Power handling is MOSFET by design, with a 1.5KVA power transformer and over 234,000 microfarads total capacitance. Incredible current reserves and 200W of power into 8 ohms (400W into 4 ohms), allow the flexibility to drive nearly any speaker. Simple, pure, elegant and powerful. The KWI 200 is proudly handcrafted in the U.S.A. Moon .5 cd LS100 Tube Preamplifier New LS 100 tube single-ended preamp from ModWright Instruments! The design goal of the LS 100 was to pick up where the 9.0SE, the first Modwright product to be produced over seven years ago, to the next level. The goals were improved sonics, aesthetics and functionality. Single-ended design with 10 function remote control, (2) 6SN7 (Driver) and (1) 5AR4/GZ34 rectifier. Single gain/buffer stage, phase inverting, five standard inputs, one Monitor input and tape output, one Home Theater Bypass (HT/BP) input and three main sets of RCA outs. Remote Control Functions Include: Power Two remote trigger outputs Selectable balance control, may be bypassed for cleaner signal path Volume control Mute Input select Monitor input select Preamp Functions Include: Upgrade slot for Optional in-board DAC or Phono stage Built in headphone amp fed via tube driver stage Home Theater Bypass All pushbutton control, no toggle switches The LS 100 is built in the same size enclosure as the KWA 100 amplifier and has the same lines and aesthetics, including backlit logo. Taller enclosure allows for greater range of rectifier tubes to fit inside. Sonically, the LS 100 offers a greater control, ease, musicality and resolution, all perfectly balanced for the ideal musical experience. Frequency response is flat from 20Hz to well beyond 100Khz. Soundstage is extremely wide and detail and microdynamics co-exist with a tube warmth and natural musical presentation that must be experienced! Recommended Tube Upgrades for the LS100: Output Tube: Sophia Electric 6SN7 Rectifier Tube: Mullard, Amperex or Phillips ‘GZ34’ Moon .5 cd KWA100SE Power Amplifier The KWA 100 provides the strengths of both tube and solid state products: 3-D sound-staging, holographic imaging, and a beautiful midrange of tubes, combined with sparkling highs, low distortion, bass resolution, and control of solid state. The heart of the KWA 100 Amplifier is a single voltage gain stage called the “Solid State Music Stage.” The circuit was developed by Alan Kimmel, creator of the exceptional vacuum tube “Mu” stage. Features include: high-low bias switch, and true balanced floating inputs, accepting balanced and unbalanced inputs. The design incorporates a regulated power supply for the input stage, and oversized heat sinks. The first watts operate in pure Class A. The KWA 100 uses no global feedback, is direct-coupled, fully differential, and designed and Handmade in the USA. The KWA 100SE includes the following upgrades: 40% increase in number of output devices per channel. 100% increase in main power supply capacitance per channel. Upgrade of key signal and power supply capacitors to MWI custom capacitors. Upgrade of key signal path resistors to Takman Carbon Film resistors. The result is better bass response, improved control and low-level detail an overall resolution Full range of Modwright Instruments products are available to order.