Devore Logo

Alt 1

O/Reference

O/Reference A

10” paper-cone woofer with a cast Bronze chassis and an all new woofer motor, fully optimized with a pure AlNiCo magnet, copper Faraday rings above and below the gap, a titanium former, and a machined bronze phase plug resulting in better magnetic and inductive linearity, increased sensitivity, and an order of magnitude lower distortion throughout most of the frequency range.

1” silk dome tweeter loaded by a cast & machined Bronze horn with an all new tweeter motor utilizing a large rare-earth magnet and an underhung voice-coil for increased linearity at lower treble frequencies and higher sensitivity.

.75” silk dome super-tweeter with a cast & machined bronze horn and rare-earth magnet.

Solid machined Bronze port tubes and machined brass input-plate are de-coupled from the cabinet to reduce vibration.

O/Reference B

11-inch reinforced aluminum woofer and all-new motor system capable of a massive 2 1/4 inch excursion.

11-inch reinforced aluminum passive radiator naturally tuned below 20Hz in-cabinet with no equalization.

Rigid two-inch thick birch plywood front baffle and solid machined brass input-plate to reduce vibration.

Dedicated 700 watt amplifier and all analog signal path including fully adjustable low-pass crossover, variable phase, subsonic filter, and equalization at 20Hz and 35Hz to tailor response to different room installations.

Michael Lavorgna, Twittering Machines
“The level of refinement and power embodied in the O/Ref System is a thing to behold”



Gibbon X

An absolutely full-range and utterly transparent reference speaker for the gibbon series. Easy to drive and easy to place in any room. The gibbon X is a three-way system with a new 3/4 inch ultra-low-mass textile dome tweeter suspended in an inert chamber, a new 7 inch midrange driver with a phase-plug and inverted natural rubber surround in it’s own sealed enclosure and a pair of massive, long-throw 9 inch woofers in a tuned 4-chamber enclosure.






Screen Shot 2020 04 16 At 11 26

Orangutan O/96

With the Orangutan O/96 DeVORE FIDELITY brings it's award-winning blend of musicality and accuracy to a new speaker designed especially for low-powered tube amplifiers. 10" paper cone with a phase-plug powered by a motor adapted from our Silverback Reference drivers. 1" silk-dome tweeter with a powerful double-magnet motor system gently horn-loaded.




O/96
Orangutan O/93

DeVore's new O93 is based on the original Orangutan O96. The 10" paper cone driver is from the same family of drivers and the silk dome tweeter is identical. The O93 is 10 Ohms with a (you guessed it) 93 dB sensitivity and a frequency response of 30Hz - 31kHz. Small wooden spikes couple the speaker to the floor.



Screen Shot 2020 04 16 At 11 27
Gibbon Super Nine

A 2.5-way design incorporating the revolutionary .75-inch textile tweeter first debuted in the gibbon X and two long-throw paper woofers in a compact but wide bandwidth, very high performance package.

.75-inch treated textile dome tweeter
Two 7-inch paper cone woofers
Paper in oil and film capacitors